เครื่องตรวจหาสายเคเบิ้ล FLUKE Networks LinkRunner AT Network Auto-Tester

The fastest way to solve network connectivity problems

LinkRunner AT CE is a high leverage Carrier Ethernet fiber/copper productivity test set that provides:

Fast answers: AutoTest accurately identifies network problems in 10 seconds
Verify connections at 10M/100M/1G on copper and fiber: Instantly verify link status, connection type, and signal strength
Quickly test patch cords and wiring during installation
Reduce provision costs by using as a remote reflector device for RFC 2544 and other performance/conformance tests with tester from Fluke Networks or other vendors
Layer 1, 2, and 3 Loopback – configurable loop back to filter frame type and swap MAC and/or IP addresses. Manual or DHCP IP configuration
Fiber power measurements – make sure that the incoming signal meets measurements
Document results – Store up to 50 test reports for complete documentation

Environmental
Operating Temperature and Relative Humidity	32ºF to 113ºF (0ºC to +45ºC) Note: The battery will not charge if the internal temperature of the tester is above 113ºF (45ºC)
Operating Relative Humidity (% RH without condensation)	90% (50ºF to 95ºF; 10ºC to 35ºC) 75% (95ºF to 113ºF; 35ºC to 45ºC)
Storage Temperature	-4ºF to 140ºF (-20ºC to +60ºC)
Shock and Vibration	Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
Safety	EN 61010-1 2nd edition
Safety (LR-AT 2000 only)	EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude	4,000 m; Storage: 12,000 m
EMC	FCC Part 15 Class A, EN 61326-1
Certifications and Compliance	Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association

General
Media Access; Copper	RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000
Media Access; Fiber	SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
Cable Tests	Pair lengths, opens, shorts, splits, crossed, straight through and cable ID
Tone Generator	IntelliTone digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Dimensions	3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight	18 oz (0.5 kg)
Battery	Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs) (included with introductory special)
Battery Life	Typical operating life is 6 hours; Typical charge time is 3 hours
External AC Adapter/Charger	AC input 90 to 264 Vac 48 to 62 Hz input power DC output 15 Vdc at 1.2 amps
Display	2.8 in color LCD (320 x 240 pixels)
Keypad	12-key elastomeric
LEDs	2 LEDs (Link and Receive/Transmit indicators)
Host Interface	USB 5-pin mini-B

LinkRunner Manager Software
Supported Operating Systems	Windows® Vista, Windows® XP, Windows® 7
Processor	400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended)
RAM	96 MB (minimum); 256 MB (recommended)
Hard Disk	Up to 500 MB of available space may be required
Display	1024 x 768 high color, 32-bit (recommended)