เครื่องมือตรวจหาสายเคเบิ้ล FLUKE Networks IntelliTone Pro Toner and Probe รุ่น PRO 100 and PRO 200

Digital toner and probe traces and locates cables on active network.

IntelliTone digital toning technology:
  • Ends cable location confusion, decisively rejects noise and false signals
  • Locates cables on active networks, even when terminated at a switch
  • Isolates cable and wiring within a bundle, despite cable bleed
  • Confirms cable location, verifies continuity, and detects faults (opens, shorts, and reversed pairs) in one step
SmartTone® analog toning technology:
  • Isolates individual wire pairs precisely by changing tone when shorted
  • Effectively traces and locates voice, audio, and video cabling 
Specifications
GENERAL SPECS
Operating temperature 32 °F to 104 °F (0 °C to 40 °C)
Storage temperature -4 °F to +140°F (-20 °C to °C)
Operating relative humidity (% RH without condensation) 95 % (50 °F to 95 °F; 10 oC to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)
Vibration Random, 2 g, 5 Hz-500 Hz
Shock 1 m drop test with and without module
Safety EN 61010-1 1st Edition Amendments 1, 2
Altitude 3000 m
EMC EN 61326-1
Battery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. POTS telecom service and UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.

 

TONER SPECS
Dimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display LED
Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) – two conductor wiring
Toner frequency IntelliTone™ signal: encoded digital signal
Analog SmartTone signal: 500 – 1200Hz, 4 songs
Talk battery voltage 6 V into 600 W
Ouptut power 5 V p-p
Voltage protection 100V
Auto power down Turns off automatically after 2 1/2 hours of inactivity

 

PROBE SPECS
Dimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display (8) LED indicators, Synch LED indicator
Audio IntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal
Control Thumbwheel switch, volume control wheel
Tone detection Detects IntelliTone™ digital signal for Locate, Isolate, and CableMap
Detects analog SmartTone signal (500-1200Hz) and other analog toners.
Toner interface Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.
Auto power down Turns off automatically after 1 hour of inactivity